PASSABLENESS OF THE CAR

At a normal backlash between breaker contacts it is necessary to check up the condenser. Strong between breaker contacts is a sign of malfunction of the condenser. To check up the condenser it is possible by means of the ampermeter. Contacts disconnect a hand, disconnect the condenser and observe of indications of an arrow of the ampermeter. If the arrow of the ampermeter has deviated to zero from position of a discharge 2-4 And, the condenser means is faulty, it is necessary to replace it.
Condenser breakdown on "weight" check by means of a portable lamp. For this purpose it is necessary to disconnect a wire of the coil of ignition and a wire of the condenser from a clip of the breaker and to connect to them a portable lamp. If at inclusion of ignition the lamp burns, the condenser is faulty. The new condenser attach near to the ignition coil, having connected its wire to a coil clip, and the case with "weight".
Check of the coil of ignition. Download gom player - free open-source multimedia player. . Looking for quality profile water cooler two temperature options . Shop online for gluten free pizza mixes . We have found where to look for stainless steel chain in the web.
For check of serviceability of the coil of ignition on the car it is necessary to uncover the distributor of ignition and, turning a cranked shaft of the engine, to come into breaker contacts in the closed condition. To include ignition, to bring the high-voltage wire going from the coil of ignition, to "weight" of the engine on distance of 6-7 mm and periodically to disconnect contacts of the breaker by a hand. If the ignition coil is serviceable (at the charged storage battery and the serviceable condenser), each disconnection of contacts should be accompanied by an uninterrupted strong spark with blue outflow. At malfunction of the coil of a spark will not be or it will be weak. At switching-off of the faulty coil of the marksman of the ampermeter becomes on zero. It is necessary to replace the faulty coil, watching reliability of connection, fastening and isolation of wires.
At check of the coil of ignition at the stand to inspect the maximum frequency of rotation of the platen of the distributor at which the ignition coil provides uninterrupted , at the stand for check of devices of system of the ignition, equipped with three-electrode needle rated sportsmen with a spark interval of 7 mm.