PASSABLENESS OF THE CAR

At the complicated inclusion of transfers by causes of defect can be:
Jamming of the spherical hinge;
Incomplete deenergizing of transfers;
Deformation of the lever of a gear change;
Deformation of plugs of a gear change;
Hard movement sliding муфт on naves at pollution ;
Hard movement of rods of plugs as a result of pollution of nests of rods, jammings of blocking crackers, agnails.
For elimination of malfunctions it is necessary to clean apertures under clamps and under , to restore or replace the worn out details. If inclusion is complicated constantly and it is necessary to make the big efforts for lever moving on this or that transfer, it is necessary to adjust a drive of management of the gear change mechanism. For its adjustment in cars VAZ-2106 and VAZ-2109, and also in the majority of foreign cars it is necessary to establish neutral transfer, to weaken a nut of the collar connecting draught through the hinge with a rod, to lift a protective cover of draught and to establish the gear change lever so that its bottom part was perpendicular to a body floor, and the lever handle was from the right seat on the distance equal to one third of distance between seats. A hand it is necessary to keep the lever in the set position and to the full to tighten a collar nut.
At spontaneous deenergizing of transfers by malfunction principal causes can be:
Deterioration of teeths the synchronizer;
Deterioration of balls and nests of rods;
Decrease in elasticity of springs of clamps;
Deterioration of blocking rings of synchronizers.
At repair it is necessary to replace or restore the worn out details.
If transfers of a forward course are spontaneously switched off, it is necessary to check up correctness and reliability of fastening of a transmission to couplings and if it is necessary, to tighten nuts. If thus it is not possible to eliminate malfunction, it is necessary to search for it in other place: to check up the mechanism and reliability of fastening of plugs of switching, a condition of teeths of gear wheels, level of deterioration of clamps and.