PASSABLENESS OF THE CAR

At detection of places подтекания oils it is necessary:
Carefully to wash out transmissions kerosene or solvent;
To check up oil level, if necessary to add it;
To powder possible places of leak with a chalk, talc or that it was possible to see leak places is better;
For oil and more exact definition of a place of its leak it is necessary to pass with a great speed about 35 km, then to lift the car and to examine possible places and to eliminate them.
At an overheat of a transmission the lowered level of oil in boxes happens the reason of the raised heating more often. It is necessary to check up it and to add to the bottom edge of a jellied aperture. Transmission heating is considered normal if the hand maintains a long touch to the transmission case. At normal level of oil presence of metal particles or a shaving in oil can be the reason of heating of a transmission. In this case it is necessary to check up quality of oil, having passed it through a control magnetic stopper or on stationary magnetic stoppers. Having found out in oil large metal particles, it is necessary to find out the reason of their occurrence. Probably, this reason is deterioration or damage of any detail.
The reason of an overheat of a transmission can be and jamming of shaft in bearings.
It is necessary to check up, whether nuts of fastening of bearings are tightened, whether bearings have worn out. If bearings are not worn out, check, whether shaft which if it is necessary, replace.